Picture of Volumetric infusion pump

Volumetric infusion pump

A volumetric infusion pump is a device that controls the drip of liquid medications or nutrients needed by the patient's body. This therapeutic device is placed in the path of the serum hose during serum therapy and with its help, the amount of dissolved fluids entering the patient's body can be controlled.

$0.000
Sharing

Misc

IV set PCV with automatic free flow protection; DEHP-free
Infusion Fluid No restrictions, blood also acceptable
Flow rate 0.1 - 1200 ml/h,0.1ml/h increments up to 999.09 ml/h and above in Iml/h, priming the line: 1200m/h
Infusion Volume 0.1 - 20000 ml,0.1 ml increments
Bolus Up t01200 ml/h,O.1 ml/h increments up to 999.9 ml/h and above in 1 ml/h;blous volume:1-500 ml Programmable volume (dose), time or flow rate. automatic and manual bolus;
KVO O -20.0 ml/h
Flow rate accuracy ±5% over 96h or 10 liters, according to IEC 60601-2-24
Occlusion pressure Downstream:11 levels :0.1-0.2 bar (75-900 mmHg)
Pressure measurement accuracy +/-15% but not lower than 0.1 bar
Upstream: automatic reduction of occlusion bolus
Graphiv presentation of infusion pressure and set level (pictograms)
Drop Detector Standard equipment, detachable
Air Detector Ultrasound, programmable sensitivity:
-single bubble: 0.05+0.3 ml
-accumulated:O.I+I.5 ml/ 15 min
Operation Modes ml/min, ml/h, ml/24h,l/h,l/24h, volume over time-automatic flow rate calculation
Optional: ng,ml,ml+h, ug, mg,g, IAU, mU, U, kU, nmol, umol, mmol, mol/kg/min, h, 24h intermittent infusion
profile-up to 24 cycles
soft and hard limits for all infusion parameters
Additional options Automatic free flow protection
Drug library up to 120 programmable drug dosing protocols
Soft and hard limits for all infusion parameters
Programmable infusion pause: 1 min-24h
Delayed start: 1 min-24h
Programmed parameters protected by password
Drug library and configuration pump to pump transfer
Alarm volume adjustment and choice of sound tvpe
Niqht mode: tuninq the displav's briqhtness and alarm loudness, proqrammable time of start/ end
Simple connection/ disconnection to docking station (also durinq infusion) Advanced pump testing system
Possibility to connect to the hospital information system directly or through docking station Open system: software update through RS232C
Induction Dose Flow rate: up to 1200 ml/h, 0.1 ml/h increments; Programmable volume (dose), time or flow rate
Write your own review
  • Only registered users can write reviews
مقایسه کالاها